Manufactured by Teraflex. TeraFlex Front Tera44 TF44 Replacement Axle Housings include a heavy-duty housing with axle tubes, bracketry, and forged inner knuckles, pre-installed inner seals and upper control arm bushings as well as OEM Rubicon locker, choice of Spicer ring & pinion gear ratio, Spicer bearings and install kits, TeraFlex heavy-duty ball joints, and factory yoke. Simply swap over axle shafts, outer knuckles, outer axle assembly, unit bearings, brakes and sensors. The comprehensive assembly makes swapping axle housings a true DIY process! These heavy-duty JK/JKU Front Tera44 R44 Rubicon Replacement Axle Housings are perfect for replacing bent, broken, or damaged front axles in JK Wrangler/JKU Wrangler Unlimited models including Rubicon vehicles. Can also be used as a direct bolt-on upgrade for JK/JKU owners looking to beef up the front axle�s weak areas. LIFT HEIGHT: 4-6� WIDTH: 70� WMS-WMS (wide) AXLE TUBE: 3.25� x 0.5� RING & PINION: 4.56 FITS: � JK Wrangler (2-door) � front � JKU Wrangler Unlimited (4-door) � front INCLUDES: � ARB air locker � Spicer ring & pinion � 4.56 � Spicer bearings & install kits � TeraFlex HD ball joints � Factory yoke FEATURES & BENEFITS: � 3.25 O.D. x 0.5� wall extreme duty axle tube increases strength to resist bending & torsion � Pre-installed inner axle seals � Forged HD inner knuckles w/ greater upper & lower section strength � Ductile cast iron housing w/ increased rib gussets � HD ductile iron differential cover � Asymmetric housing design, for extra-long tube side strength � Smooth radius bottom design to glide over rocks & obstacles � Integrated lower flexarm skid plates � Bottom oil drain hole for simple fluid changes � Premium UV protected triple-stage powder coat process for superior corrosion resistance � 1/4�-thick CNC laser cut axle brackets for extreme strength � Integrated factory location upper control arm mount � Pre-installed upper control arm bushings � Reinforced front track bar mount (ties into spring pad) for greater strength � Proper pinion angle for lifted JK applications � Pre-tapped hole on spring perch for bump stop extensions � Pre-drilled holes for limit straps & lower spring retainers � Retains all JK/JKU ESP, ABS, & speedometer sensor capability � 100% engineered, designed, & built in the USA � 100% new components � 1-Year / Unlimited Mileage Warranty NOTE: � The TF44 axle is designed to work with non-Rubicon Dana 44 lockers. Please consult the Tera44 axle flow chart prior to placing your order. REQUIREMENTS & RECOMMENDATIONS: � Below is a list of Requirements & Recommendations for TeraFlex axle housings as budget and build preference allows. � Questions? Stop scratching your head and contact us! We know our axles AND we�re here to help! CONTROL ARM UPGRADE � 4-6� LIFT: This much lift REQUIRES adjustable flexarms for caster angle adjustments. Front upper (# 1415520) & front lower (# 1415500) TeraFlex Adjustable Alpine Flexarms will work w/ 2.5-4� lifts. Front upper (# 1315520) & front lower (# 1315500) TeraFlex Adjustable Alpine Long Flexarms will work w/ 3-6� lifts. INNER AXLE SHAFT UPGRADE � 0-6� LIFT: REQUIRES aftermarket inner axle shafts to handle the additional power. TeraFlex offers 34.19� passenger side axles (# 304136) & 19.11� driver side axles (# 304120). These shafts MUST be used w/ 2013-2017 JK axle U-joint. AXLE STUB UPGRADE � 0-6� LIFT: High-quality aftermarket chromoly stubs are recommended, though the stock 2013-2017 JK/JKU outer axle stubs can be (re)used. AXLE SHAFT TUBE SEAL UPGRADE � 0-6� LIFT: Get serious with HD 0.5� wall seals (# 4354050) or keep it real with standard 0.25� wall seals (# 4354025). Stock seals may also be reused. STEERING SYSTEM UPGRADE � 4-6� LIFT: Get the optimal set up w/ the Complete High Steer System w/ HD Tie Rod & Drag Link Flip Kit (# 4391000) or save a little w/ the HD Tie Rod & Flipped Drag Link Kit (# 1853905). For tighter budgets, the High Steer Knuckle Kit (# 4390879) will provide the necessary steer height w/ your stock steering components. The factory steering system may also be reused. BRAKE UPGRADE � 0-6� LIFT: Experience a notable difference w/ a TeraFlex Big Brake Kit (# 4303400 or # 4303420) or Big Rotor Kit (# 4303480 or # 4303490). INSTALL TIME: 6 Hours

Teraflex JK: Tera44 HD Wide Front Axle Housing w/ 4.56 R&P & ARB Locker (4-6" Li

SKU: TF35434564
$4,239.99Price

    Total Auto Pros Wholesale

    5301 N. 16th Street

    Phoenix , AZ 85016

    602-280-7767

    Subscribe for Updates